Overview
- 12-Port Layer 2+ Managed PoE+ Gigabit Switch
- 8 x 2.5GbE PoE/PoE+ (802.3af/at), up to 30 Watts per port
- 4 x 10GbE SFP+ slots
- 1 x RJ-45 Console Port
- PoE power budget of 140 watts
- PoE Scheduling & Ping watchdog power cycle
- Built-in RADIUS server for 802.1x authentication
- 120 Gbps switching capacity
- Port-based and 802.1q tagged VLANs (MAC address, and protocol)
- Voice and Surveillance VLANS with QoS (OUI Mode) providing improved call and video quality
- ONVIF (Open Network Video Interface Forum) compliant
- QoS with 8 queues for traffic prioritisation
- Enterprise-Level security features
- 802.1x Port Security, ACL, IP Source Guard and DHCP Snooping
- Access Control (IPv4, IPv6 and MAC address)
- IP Conflict Prevention to avoid IP conflicts caused by misconfigured or malicious hosts
- Support IPv6 with MLD Snooping, IPv6 ACL, and IPv6 DNS Resolver
- Authentication by local database, multiple RADIUS, and TACACS+ servers
- IEEE 802.3az (Energy-Efficient Ethernet) Compliant
- Support SNMP v1/v2c/v3, RMON, and Syslog for network monitoring
- Port Mirroring & Link Aggregation
- Compliant with Central Switch Management features of DrayTek Vigor devices for simplified network management Learn more
- Compliant with VigorConnect free software for local network management Learn more
- Supports VigorACS 3 Central Management Software for remote management
- 2 years back to base warranty
L2+ Managed 2.5GbE Switch with 8 x 2.5GbE PoE+ ports (140W total), 4 x 10GbE SFP+ slots, and 1 x Console port
The VigorSwitch PQ2121x is a Layer 2+ Managed switch with 8 x 2.5GbE PoE+ RJ-45 ports and 4 x 10GbE SFP+ ports for connecting optic fibre modules or DAC cables. Each of the eight 2.5 Gigabit Ethernet ports of the VigorSwitch PQ2121x supports 802.3at and 802.3af PoE standards, providing up to 30W of power per port for a total power budget of 140 watts. Network connectivity and reliability are enhanced with advanced Layer 3 features plus a DHCP server and VLAN routing. The PQ2121x enables full WiFi 6 capability when deployed with WiFi 6 VigorAPs like VigorAP 1062C.
Interface
- 1 Power Socket
- 2 LED Indicator
- 3 Reset Button
- 4 8 x 2.5GbE PoE/PoE+ ports
- 5 Console Port
- 6 4 x SFP+ Ports
ONVIF-Friendly
Recognise ONVIF devices in different VLANs, display surveillance topology, provide UI for video streaming and device maintenance
Centralised Hierarchical View The VigorSwitch PQ2121x automatically detects ONVIF devices and displays the topology of connected IP cameras and NVRs.
Image Viewing Images filmed by IP cameras can be viewed directly within the VigorSwitch PQ2121x web UI.
Device Management Basic configuration/maintenance tasks for ONVIF devices such as remote reboot, factory reset and changing network settings can all be done remotely from the VigorSwitch PQ2121x web UI.
ONVIF Snapshot Alert
Locating Non-Responding IP Cameras Made Easy
Managing a network of IP cameras across different locations is difficult, as when any of the cameras stop functioning, there is no easy way to detect or revive it. To help with this problem, the VigorSwitch PQ2121x regularly pings ONVIF IP cameras and takes snapshots from them periodically. If one IP camera stops responding, an email alert is sent with the latest snapshot from the camera. With PoE VigorSwitch models, the switch can also provide first aid by automatically power cycling the particular port to reboot the camera.
IP Conflict Detection & Prevention
Conflict Detection
The VigorSwitch constantly checks the network environment and notifies the administrator of any IP conflicts.
Conflict Prevention
For a more stable network, the VigorSwitch detects misconfigured or malicious IP hosts and blocks them before damages are done.
Device Check
Ping Check for LAN Devices
A VigorSwitch can continuously ping the LAN devices, and when the device stops responding to the ping, it will instigate a PoE cycle to the associated port (PoE model only) and/or send an email alert to the administrator.
LAN Management
An all-in-one management platform for Vigor devices on the LAN side.
Automatic Device Discovery
Connect a Vigor Switch or AP to the LAN side of the Vigor Router, and the router will auto-discover the device to allow it to be managed.
Provisioning Basic settings may be done on the Vigor Router, and then provisioned to the managed Vigor Switches or APs.
Monitoring The Vigor Router provides a centralized view of managed devices, so you can monitor and check the status of Vigor Switches or APs connected.
System Maintenance Perform factory resets, save/restore configuration backups, or trigger reboots remotely from the Vigor Router’s interface. There is no need to log in to each device’s management page.
Key Features
PoE (Power over Ethernet) Deliver power and data over one ethernet cable, turn on/off the PoE device periodically with PoE Schedule.
QoS (Quality of Service) Improve the performance of critical traffic by prioritising it with CoS, DSCP, and IP Precedence tag.
Ping Device Check Enable Ping check to selected devices to keep monitoring on their status. If ping timeout, power cycle (if PoE enabled) the port and/or send out mail alert.
ONVIF-Friendly Recognise ONVIF devices, display surveillance topology, provide UI for video streaming and device maintenance.
Learn more
2.5GbE Provides higher performance to WiFi 6 AP and other Ethernet devices.
IPv6 Ready VigorSwitch PQ2121x supports IPv6 by offering MLD Snooping, IPv6 ACL, and IPv6 DNS Resolver.
10G SFP+ Provides 10G-capable fiber SFP+ ports for aggregation or uplinking to the core switches.
Web-Based GUI Easily manage and monitor the network through the web-based console with graphics showing ports and hardware status.
See demo.
Wire-Speed VLAN Routing Improve overall network performance by using VigorSwitch PQ2121x to route the inter-VLAN traffic directly and off load the router.
Multiple Admin Accounts Multiple Admin accounts with two levels of administrator privilege.
Auto Surveillance & Voice VLAN Recognise traffic from IP cameras and IP phones automatically and add CoS tag for QoS prioritisation.
Central Switch Management Set up VLANs easily from the router and get a centralised hierarchy view of the switches.
Learn more
IP Conflict Prevention Improve network stability by avoiding IP conflicts caused by a misconfigured or malicious host.
Learn more
Management Solution
| Central Switch Management |
- Auto-Discovery
- Provisioning
- Monitoring
- Centralized Hierarchy View
- Reboot PoE Devices Remotely
- Quick VLAN Configuration
|
| VigorACS 3 |
- Zero Touch Deployment & Provisioning
- Auto VPN
- Interface Quality & SLA
- VoIP Optimization & Monitoring
- Application Visibility
- Application Based SD-WAN Policy
- Customized Hotspot Page with Multilingual
- Hotspot Clients Analytics
- ACS Server Load Balancing / Failover
|
|
| VigorConnect |
- Auto-Discovery
- Auto-Provisioning
- Monitoring
- Centralised Hierarchy View
- Alarm
- Reboot VigorAP Remotely
- Scheduled Maintenance
|
In-the-box
Note: The throughput figures are maximum, based on DrayTek internal testing with optimal conditions. The actual performance may vary depending on the different network conditions and applications activated.
ConfigDemo
